Custom Window Cornices by Starkwood Designs

This is just a sampling of what is available.
If you don't see what you want here, please call or email us.

We apologize for the wait, but this page is graphics-intense and may take longer than normal to load.

Measurements shown - height x thickness

(Most architectural moldings (except the crown moldings) can be used for
the top or bottom edge of a cornice simply by inverting their position)

*Architectural Moldings* Species Available Codes: Ma = Mahogany R=Red Oak P=Poplar C=Cherry M=Maple W=Walnut

BOS222 3-3/4" x 3/4" MaRPCM			BOS139 3-1/4" x 3/4" MaRPCM	BOS137 4-1/2" x 1" MaRPCM	BOS26 3-1/4" x 1" MaRPCM

BOS24 3-1/2" x 3/4" MaRPCM		BOS21 3-3/4" x 1" MaaRPCM		WRH-DH190 5-1/4" x 1-1/8" RP

BOS3 1-1/8" x 3/4" MaRPCM			BOSCTE004 1-9/16" x 25/32" MaRPCM	BOS570 2" x 3/4" MaRPCM	BOS103 3/4" x 7/16" MaRPCM

BOS430 1-/18" x 3/4" MaRPCM	BOSHALF Several widths available MaRPCM			BOSPM04 1-3/16" x 7/16" MaRPCM		BOSPM05 7/8" x 1/2" MaRPCM

BOS336 1-3/8" x 23/32" MaRPCM			BOS406 1" x 3/4" MaRPCM	MCMBB160 1-3/16" x 9/16" RP	BOS405 1-1/8" x 7/16" MaRPCM

BOS504 11/16" x 5/8" MaRPCM			BOS502 3/4" x 5/8" MaRPCM	BOS503 3/4" x 3/4" MaRPCM	BOS417 3/4" x 5/8" MaRPCM

BOS141 3" X 11/16" MaRPCM			BOS947 1-1/4" x 3/8" MaRPCM	MCMS307 1-3/8" x 7/16" RP	BOS163 2-11/16" x 3/4" MaRPCM

MCMBB206 3/4" x 3/4" MaRPCM			BOS270 2-1/2" x 5/8" MaRPCM	MCMBB95 3/4" x 3/4" MaRPCM	MCMBB75 1-5/8" x 1/2" RP

MCMBB300 3" x 1-1/16" RP			MCMC005 2-1/4" x 3/4" RP	MCMT601 2-3/8" x 11/16" RP	MCMBB49 3-5/8" x 11/16" RP

BOS68 4-9/16" x 3/4" MaRPCM				BOS60 3-5/8" x 3/4" MaRPCM

WRHB401 6" x 3/4" RP Only				WRHB468 4-1/2" x 11/16" RP Only

WRHMM195 5-7/8" x 1-3/4" Poplar only				WRHBA44 6" x 3/4" Poplar Only

Embossed Moldings These are made on c.1910 bronze-die molding machine. RCM = Available in Red Oak, Cherry and Maple
	AL1002RCM 3/8" x 3/16"
	AL1022RCM 1" x 9/16"
	AL1025 1-3/6" x 1/4"
	AL1007RCM 5/8" x 1/4"
	AL1012 3/4" x 5/8"
	AL1026 1-1/4" x 13/16"
	AL1001RCM 1/4" x 1/8"
	AL1029RCM
	AL1006RCM 9/16" x 1/4"
	AL1031 1-3/8" x 1/2"
	AL1044RCM 2-11/32" x 1/4"
	AL3002RCM 7/8" x 1/2"
	AL3003RCM 1/2" x 1/2"
	AL3006RCM 5/8" x 1/4"
*Specialty and Carved Moldings*
In addition to the above, Starkwood Designs is pleased to announce that we are now utilizing the full line of decorative moldings and the new Authentic Hand Carved ^tm woodcarvings manufactured by Whiteriver Hardwoods, Inc. Below is just a sample of what they have available. (Order catalog of moldings)
PLEASE NOTE: The moldings shown below are only available in paint-grade

The Mon Reale Series of carved composite moldings from WhiteRiver Hardwoods (available in painted finishes only)
	Back Band BB8111 Petite Acanthus Leaf 2-1/2" x 1-3/4" Pattern Repeat: 2-7/8"
	Cornice Molding CM8808 Large Acanthus w/Dentil & Egg and Dart 5-5/8" vertical height 5" overhang Pattern Repeat 7-1/2"
	Frieze Molding FR8921 Leafy Scrolls 3-3/4" x 13/16" Max. Thickness 1" Pattern Repeat 6-1/8" (A panel molding can be added to the top edge to produce a symmetrical look.)
	Panel Molding PM8511 Running Leaf 2" x 13/16" Pattern Repeat 2-1/4"
	Panel Molding PM8522 Small Beads 1" x 9/16" Pattern Repeat 1/4"
	Panel Molding PM8520 Running Coin 2" x 7/8" Pattern Repeat 1"
	Panel Molding PM8523 Large Beads 1-3/4" x 7/8" Pattern Repeat 1/2"
	Panel Molding PM8524 Small Beads 1" x 5/8" Pattern Repeat 1/4"
	Panel Molding PM8525 Large Beads 1-1/2" x 7/8" Pattern Repeat 1/2"
	Panel Molding PM8526 Small Bead & Barrel 1" x 9/16" Pattern Repeat 2-3/8"
	Panel Molding PM27 Twisted Rope
	Crown Molding CM87 Rope and Dentil oak or poplar
	Crown Molding CM74 Dentil oak or poplar
	Crown Molding CM882 Dentil oak or poplar